35
PREPARATIONS
3 Insert the printer paper in the direction shown below and pull out the paper end to your side by 7
to 8cm.
4 Bring the paper into the center, then close the printer cover.
SUPPLYING THE CHINREST TISSUE
Set the chinrest tissue by chinrest tissue pins.
For details, See "REPLACING THE CHINREST TISSUE" on page 118.
TRANSPORTING OF THE INSTRUMENT
When the instrument is transported, the instrument should be set as packing mode. In the case that
packing mode is required, call your service engineer.
NOTE
In case the printer cover is not firmly closed, printing will not start.
Roll direction
To Next Page
Loading...
