Topcon TRK-3 OMNIA - Printer Output (in Ref;Krt Measurement Mode)

22
COMPONENTS
PRINTER OUTPUT (IN REF/KRT MEASUREMENT MODE)
KRT typical value style and KRT print data are HV
NOTE
• C mark appears when the button is selected by manual
operation.
Adding the C mark occurs only for REF measurement values.
• The ( ) mark is attached when the measurement cannot be performed
normally due to cataract, eyelids, eyelashes, blinking, etc. and the mode
automatically switches to cataract mode.
The ( ) mark appears only on REF measurements.
NAME
REF. DATA
R
C
C
C
S
-0.25 -0.75 88
-0.25 -0.75 90
CYL : ( - )
CA
VD : 12.00
2021_ 12_24 10 : 00 AM
N o . 0 0 0 1 01
-TRK 010602-
-0.25 -0.75 90
S.E. -0.25
S.E. -0.75
-0.25 -0.75 90
L
S
+0.25
(
)
-0.75 88
+0.25 -0.75 90
CA
+0.25 -0.75 90
+0.25 -0.75
-0.75
90
-0.25+0.25 9090
KRT.DATA
R
CORNEA DIA : 12.00
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-1-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-2-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-3-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
OID :
SN:
TOPCON
----------------
L
CORNEA DIA : 12.00
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-1-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-2-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
-3-
D
H 43.50 7.77 1
43.25 7.79
43.25 7.80 91
V
CYL -0.25 91
AVG
MM A
----------------
PD :65
Barcode
Patient No./Patient ID
Device ID number
VD (vertex distance)
Cylinder sign
3 readings of REF right
measurement (recordable
up to 10 measurements)
Typical value of right eye
Spherical equivalent power
of right eye
The ( ) mark appears when the
mode is changed to the cata-
ract mode automatically during
a measurement.
Pupil distance (PD value) (mm)
Operator ID
Serial number
Refractive power measurement result (R)
Refractive power measurement result (L)
3 readings of kerato-
cylinder value, average
value and kerato-cylinder
value (recordable up to 10
measurements each for
right/left eye)
Left eye corneal curvature
measurement
Typical measured value of right eye corneal curvature
Measured value of horizontal
corneal curvature
Measured value of vertical
corneal curvature
Direction of corneal
principal meridian
Measured value of right
eye cornea diameter
Typical measured value of
Left eye corneal curvature
TOPCON logo mark
C mark
appears when
the mode is
changed to the
cataract mode
manually
during a mea-
surement.
Patient No.
Device ID
number
Cataract