57
BASIC OPERATIONS
BASIC OPERATIONS
MEASUREMENT IN REF/KRTTONO/PACHY CONTINUOUS MEASUREMENT MODE
SETTING THE AUTO MODE IN REF/KRT
1 Check the Measurement screen. If the button is “AUTO”, the mode is Auto
mode.
2 If “MANUAL” (Manual mode) is displayed, tap it and change to the Auto mode.
ALIGNMENT AND MEASUREMENT IN REF/KRT
Alignment can be operated from the control panel.
1 When the pupil is displayed, tap the display around the pupil. The measuring head moves to
display the pupil image and alignment dot on the center of the screen. Then tell the patient to
look at red-roof house.
Auto/Manual
To Next Page
Loading...
