95
OPTIONAL OPERATIONS
ALIGNMENT AND MEASUREMENT
1 Select the right/left eye by tapping the button/ button or operating the control lever.
2 Use the control lever to align the center of the pupil within the alignment mark. At this time, tell
the patient to look at the green alignment dot.
3 While watching the anterior image, focus on the patient's eye by tilting control lever back and
forth. The alignment dot is reflected off-focus on the cornea.
NOTE
As the main body approaches the patient, focus of Measurement screen
changes.
R L
Outer alignment mark
Alignment dot
Alignment mark
To Next Page
Loading...
