Topcon TRK-3 OMNIA - Monitor Screen

18
COMPONENTS
Fog button.....................................Changes setting temporarily to perform fogging only in the
first measurement or each time in the continuous measure-
ment.
All data button.....................................Displays all measurement data on the screen.
Print out button ..............................Prints measurement results. Tap the button when no mea-
surement data is present to feed the paper.
Alignment stop button.....................Displayed during an alignment or measurement, the align-
ment or measurement operation is stopped.
Target image button ............................Opens the target image view screen.
All clear button..............................Clears all measurement data.
Setting menu button............................Shifts to the setting menu screen.
MONITOR SCREEN
MEASUREMENT SCREEN
Outer alignment mark
VD (Vertex distance)
Refractive power
measurement result
Corneal curvature radius
measurement result
Device ID numberTypical value of measurement
D/mm unit display
Number of measurements/
settings
Number of reading/setting
(KRT)
Y-axis position
* Eye Height mark: Shows the position of the eye height mark on the chinrest.
Alignment mark
* Eye Height mark