Topcon TRK-3 OMNIA - Page 28

26
COMPONENTS
Printed example when “Printer order” of “Print” is set to “R/L”
NOTE
• The “M” mark is printed on the value measured by manual measurement or
measured by start button in Auto mode. (In the error of ERR, OVER, etc.,
the “M” mark is not printed.)
• The value with low reliability is outputted with the ( ) mark.
-TRK 010017-
OID:TOPCON_TAROU
NAME
2021_01_01
TONO. DATA
< R >
mmHg hPa
AVG
ERR
( 13)
12
13
12.5
ERR
(17)
16M
17
16.5
ADJ. ADJ.
ERR
( 13)
12
13
12.5
ERR
(17)
16M
17
16.5
PACH. DATA
< R > mm
AVG.
ERR
0 . 5 1 0
0 . 5 1 1 M
0 . 5 1 0
0 . 5 1 0
TONO. DATA
< L >
mmHg hPa
AVG
ERR
( 13)
12
13
12.5
ERR
(17)
16M
17
16.5
ADJ. ADJ.
ERR
( 13)
12
13
12.5
ERR
(17)
16M
17
16.5
PACH. DATA
< L > mm
AVG.
ERR
0 . 5 1 0
0 . 5 1 1 M
0 . 5 1 0
0 . 5 1 0
11:00 AM
NO:Patient ID
SN:0000001
01
IOP ADJ FORMULA
A
:
520 B
:
120
TOPCON
Hello World
Barcode
Patient No.
Patient No.
(Patient ID when Patient ID is input) *
Device ID number
Operator ID
Result of IOP adjustment by CCT
Adjusted measurement value “hPa”
Display unit at Pachy
Message column
Device ID number
Serial number
Title of TONO value
Average value of CCT
Average value of
adjusted measurement value “hPa”
Tono value on display unit “hPa”
Tono average value on display “hPa”
Topcon Logo mark
Name entry column
Measurement date
Adjusted measurement value
Tono value on display unit “mmHg”
Average value of adjusted
measurement value “mmHg”
Tono average value on display unit “mmHg”
Title of Pachy value
Measured value of CCT
Title of IOP ADJ Formula
Center CCT Base/Adjustment Coefficient