79
OPTIONAL OPERATIONS
4 If it has been measured, a still image is displayed, and if it has not been measured, “No Image”
is displayed. Press the
button to see the Live image. When the pupil is displayed, tap
near the pupil. The measuring head moves to the position the pupil image and alignment dot are
at the center of the screen. Press the
button to take the still image.
5 Tap either the left or right button to move the positioning bar.
6 Use the left button to move the left positioning bar to the left end of the
iris as seen from the control panel side.
Live
Capture
Positioning bar control
Positioning bar control button (R)Positioning bar control button (L)
Positioning bar control
To Next Page
Loading...
