6
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
ERROR CODE and TROUBLESHOOTING
6 - 17
CFA0 Paper transport
service call
Media sensor output abnormality before paper
reaching: The sensor output value before paper is
reached to the media sensor is not normal.
P. 6 - 9 3
CFA1 Media sensor output abnormality during paper
passing: The sensor output value while paper is
being passed is not normal.
P. 6 - 9 3
F070 Communication
related service call
Communication error between System-CPU and
Engine-CPU
P. 6 - 8 7
F090 Circuit related service
call
SRAM abnormality on the SYS board P. 6-90
F100 Other service call HDD format error: HDD cannot be initialized
normally.
P. 6-126
F101 HDD unmounted: Connection of HDD cannot be
detected.
P. 6-126
F102 HDD start error: HDD cannot become ‘Ready’ state. P. 6-126
F103 HDD transfer time-out: Reading/writing cannot be
performed in the specified period of time.
P. 6-126
F104 HDD data error: Abnormality is detected in the data
of HDD.
P. 6-126
F105 HDD other error P. 6-126
F106 Point and Print partition damage P. 6-126
F107 /BOX partition damage P. 6-126
F108 /SHA partition damage P. 6-126
F110 Communication
related service call
Communication error between System-CPU and
Scanner-CPU
P. 6 - 8 7
F111 Scanner response abnormality P. 6-87
F120 Other service call Database abnormality: Database is not operating
normally.
P. 6-126
F130 Invalid MAC address P. 6-126
F140 Accelerator ASIC format error P. 6-126
F200 Data Overwrite option (GP-1070) disabled P. 6-127
F350 Circuit related service
call
SLG board abnormality P. 6-90
F400 SYS board cooling fan abnormality P. 6-90
Error code Classification Contents Troubleshooting
To Next Page
Loading...
