2
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
SELF-DIAGNOSTIC MODE
2 - 11
[FAX] button: OFF/[COPY] button: ON/[SCAN] button: OFF
([FAX] LED: OFF/[COPY] LED: ON/[SCAN] LED: OFF)
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
[1]
- Temperature/humidity sensor (displays
temperature inside of the equipment)
- Temperature [°C]
[2]
- Temperature/humidity sensor (displays humidity
inside of the equipment)
- Humidity [%RH]
[3]
- Drum thermistor-K
(displays temperature on the drum surface of K
color)
- Temperature [°C]
[4]
- Drum thermistor-Y
(displays temperature on the drum surface of Y
color)
- Temperature [°C]
[5]
A- --
B 5V SW monitor OFF ON
C- --
D- --
E- --
F Fuser transport sensor No paper Paper present
G Lower paper exit sensor Paper present No paper
H Registration sensor Paper present No paper
[6]
A Interlock detection (24 V shut-off detection) Normal 24 V shut off
B- --
C- --
D- --
E- --
F- --
G- --
H- --
[7]
A Upper paper exit sensor Paper present No paper
B Bridge unit connecting detection switch
(Refer to table 7)
OFF(H) ON(L)
C- --
D- --
E Bypass paper size detection sensor-3
(Refer to table 8)
OFF (H) ON (L)
F Bypass paper size detection sensor-2
(Refer to table 8)
OFF (H) ON (L)
G Bypass paper size detection sensor-1
(Refer to table 8)
OFF (H) ON (L)
H Bypass paper size detection sensor-0
(Refer to table 8)
OFF (H) ON (L)
[8]
A Reverse path cover switch Cover opened Cover closed
B Stopper opening/closing detection sensor (front) Stopper opened Stopper closed
C Stopper opening/closing detection sensor (rear) Stopper opened Stopper closed
D- --
E Detecting connection between bridge unit and
drawers
(Refer to table 7)
OFF (H) ON (L)
F Reverse section paper transport detection
sensor
Paper present No paper
G Standby side tray paper amount detection
sensor
No paper Paper present
H Feed cover sensor Cover closed Cover opened
To Next Page
Loading...
