e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 44
75 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Recycled paper)
Refer to 3.3.1Automatic gamma adjustment
76 Printer gamma correction table creation pattern
(PS: 600dpi)
(Thick paper 1)
Refer to 3.3.1Automatic gamma adjustment
77 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Thick paper 1)
Refer to 3.3.1Automatic gamma adjustment
78 Printer gamma correction table creation pattern
(PS: 600dpi)
(Thick paper 2)
Refer to 3.3.1Automatic gamma adjustment
79 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Thick paper 2)
Refer to 3.3.1Automatic gamma adjustment
80 Printer gamma correction table creation pattern
(PS: 600dpi)
(Thick paper 3)
Refer to 3.3.1Automatic gamma adjustment
81 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Thick paper 3)
Refer to 3.3.1Automatic gamma adjustment
82 Printer gamma correction table creation pattern
(PS: 600dpi)
(Thick paper 4)
Refer to 3.3.1Automatic gamma adjustment
83 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Thick paper 4)
Refer to 3.3.1Automatic gamma adjustment
84 Printer gamma correction table creation pattern
(PS: 600dpi)
(Special paper 1)
Refer to 3.3.1Automatic gamma adjustment
85 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Special paper 1)
Refer to 3.3.1Automatic gamma adjustment
86 Printer gamma correction table creation pattern
(PS: 600dpi)
(Special paper 2)
Refer to 3.3.1Automatic gamma adjustment
87 Printer gamma correction table confirmation
pattern (PS: 600dpi)
(Special paper 2)
Refer to 3.3.1Automatic gamma adjustment
98 Grid pattern -2 (For printing K(4) / Plain paper) Refer to 3.1.7Printer-related image dimensional
adjustment
99 Grid pattern -2 (For printing K(4) / Thick paper
1)
Refer to 3.2.1Automatic gamma adjustment
100 Grid pattern - 1 (Full color / Thick paper 1) Refer to 3.2.1Automatic gamma adjustment
101 Grid pattern - 1 (Black / Thick paper 1) Refer to 3.2.1Automatic gamma adjustment
104 Color deviation confirmation pattern (A3/LD) Refer to 3.2.1Automatic gamma adjustment
112 Media sensor feeding check Printing on blank paper
138 Grid pattern - 2 (For printing K (4) / duplex
printing)
151 Pattern for checking uneven image density
correction in primary scanning direction
Available only when A4/LT paper is selected (Not
available for bypass feeding)
200 Copier gamma adjustment pattern
(Color & black / Plain paper 1)
Refer to 3.2.1Automatic gamma adjustment
201 Copier gamma confirmation pattern
(Color / Plain paper 1)
Refer to 3.2.1Automatic gamma adjustment
Code Types of test pattern Remarks
To Next Page
Loading...
