System
120 Tenant Data Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 4-37
System
120 Tenant Data Assignment
Prerequisite Program: None
This program enables you to select an
Attendant or Night Bell to ring when
dialing 0 in Day 1, Day 2 or Day 3 mode for
up to eight different Tenants. You can also
assign the general purpose relay to the
Night Bell in this program. (This feature is
available with Strata CTX R2.2 or higher
and CTX WinAdmin R2.2G0 or higher.)
1. From the Program Menu, click System
> Tenant Data.
2. Enter the Tenant Number or use the
pull-down to select a number.
3. Enter data.
4. Click Submit.
6957
FIELD DESCRIPTION
00 Tenant Number Select the Tenant number for which the daily schedules will be configured.
Possible values: 1~8. No Data (Default)
01 Dial 0 Call Day 1 Dst Type
02 Dial 0 Call Day 2 Dst Type
03 Dial 0 Call Night Dst Type
Select to call an Attendant or select to ring the Night Bell when dialing the
Tenant Attendant Access Code in the Day1, Day 2, or Day 3 mode for this
Tenant.
Important! The Tenant Attendant Access Code must be assigned in Prg
102. If it should be “0,” the Attendant Console Group Access
Code, which is “0,” must be deleted.
Possible values: No Data (default), Dialing Digits, Night Bell
01 Dial 0 Call Day 1 Dst Digits
02 Dial 0 Call Day 2 Dst Digits
03 Dial 0 Call Night 3 Dst Digits
Enter the PDN of the Attendant (BATI) to ring when dialing Tenant Attendant
Access Code in Day, Day2, or Day 3 mode.
Possible values: Up to 32 digits for each Day Mode selected (default =
noData)
04 Night Mode Relay Enter the General Purpose relay number assigned to the Night Bell. BIOU
relays 1~8. This operation activates the relay continuously when the system is
in the night mode.
BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
05 Night Bell Relay Enter the General Purpose relay number assigned to the Night Bell. BIOU
relays 1~8. This operation activates the relay when a CO line or DID rings
when the system is in night mode. The CO or DID line must be assigned to
ring the night bell.
BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5
To Next Page
Loading...
