Toshiba Strata CTX28 - Isdn; Isdn Bri Trunk

Trunks
ISDN
6-22 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
ISDN
System Availability: Not available with CTX28
The following program enables set up for ISDN related system settings.
317 ISDN BRI Trunk
Prerequisite Program: 100 page 4-1
1. This command assigns ISDN BRI
Trunks.
1. Complete the “ISDN BRI Station
Record Sheets” on page D-19. From
the Program Menu, click Trunk >
ISDN > BRI.
2. Enter Channel Group number
...or click one of the following
buttons:
• List – view a summary list of
programmed Trunks.
• Create – Assign a new Trunk
with default settings.
• Copy – Enter a Channel Group
number and click Copy to make a new Trunk assignment with settings copied from the Channel
Group you entered.
• Delete – Delete an Trunk.
3. Enter data.
4. Click Submit.
FIELD DESCRIPTION
Channel Group Enter the BRI channel Group Number.
Possible values: 1~32 (CTX28 & CTX100), 1~48 (CTX670 Basic),
1~128 (CTX670 Exp), (default = no value)
01 Equipment Number Enter the equipment number xxyyzz to which the ISDN BRI Trunk is to be assigned.
Example: If the RBUU is installed in cabinet shelf 5, slot 3, enter 050301 for circuit 1.
Possible values: xx = Cabinet 01~07; yy = Slot 01~10; zz = Circuit 01~08 or 01~24
(CTX670)
xx = Cabinet 01; yy = Slot 01~08; zz = Circuit 01~04 (CTX100)
(default = no value).
Cabinet numbers:
• CTX100 – Select 01 for Base and Expansion cabinet.
• CTX670 – Select 01 for Base and 02~07 respectively for each Expansion cabinet.
Slot numbers:
• CTX100 – Select 01~04 for Base slots and 05~08 for Expansion slots.
• CTX670 – Select 01~08 for Base slots and 01~10 for Expansion slots.