Services
658/659/660 Network DRL/FRL/QPL Mapping Tables
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-59
Services
658/659/660 Network DRL/FRL/QPL Mapping Tables
System Availability: Not available with CTX28
Prerequisite Program:
None
These commands are used to establish two mapping tables to equate local DRLs, FRLs and QPLs with
network DRLs, FRLs and QPLs for both outbound and inbound network calls.
661 Network DN Table Assignment
System Availability: Not available with CTX28
Prerequisite Program:
None
This program assigns the PDN, PhDN or
Pilot DNs to a CTX node ID. This include
all DNs in all CTX nodes on the CTX
network, except the DNs in the node you
are currently programming
(This feature is
available with CTX R2.2 or higher and
CTX WinAdmin R2.2G.0 and higher.)
This enables someone in one node to call
an extension in another node, without
having to dial the node ID number. The
caller dials the extension and the system
appends the Node ID. This function is
transparent to the caller and the dialed
party. (See Example.)
¥
In Program 661, enter a Network DN,
followed by it’s node MD. Repeat this process for each DN.
FIELD DESCRIPTION
Type Select the Network DRL/FRL/QPL type.
Possible values: Outbound or Inbound (default = no value)
• Outbound – maps a local DRL/FRL/QPL to a Network DRL/FRL/QPL.
• Inbound – maps a Network DRL/FRL/QPL to a local DRL/FRL/QPL.
Network DRL/FRL/QPL Enter the Network DRL/FRL/QPL (for outbound) you want to map to a Local DRL/FRL/
QPL.
Possible values: DRL/FRL/QPL1~DRL/FRL/QPL16 (default = 1~16)
Local DRL/FRL/QPL Enter the Local DRL/FRL/QPL (for inbound) you want to map to the Network DRL/FRL/
QPL selected in the Network DRL/FRL/QPL field above.
Possible values: 1~16 (default = 1~16)
FIELD DESCRIPTION
00 Network DN Enter the PDN, PhDN or Pilot DNs that should be assigned to a CTX Node ID. This
include all DNs in all CTX Nodes on the CTX network, except the DNs in the node you
are currently programming.
Possible values: 3000 (CTX670), 1000 (CTX100)
Five digits max. (Default = No Data)
01
Node ID Enter the CTX Node ID that should be assigned to the DN.
Possible values: Six digits max. (Default = No Data)
6958
To Next Page
Loading...
