Station
209 Hunt Group
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 5-27
Station
218 Station Hunt Assignments
Prerequisite Program: 209 page 5-26
This program assigns station DNs to Hunt Groups using Program 209, and assigns the rotation order in
which DNs are hunted.
1. Complete the “Hunt Group Record
Sheet” on page D-17.
2. From the Program Menu, click
Station > Hunt Group. The Station
Hunt Group screen displays.
3. Click on the Member tab (shown
right).
4. Enter a Group Number for an
existing record
...or click one of the following
buttons:
• List – view a summary list of
programmed Hunt Groups.
• Add – Assign a new station DN to the Hunt Group number entered above.
• Append – Assign a new DN as the last DN in a Hunt Group’s hunt order.
• Modify – Highlight an existing DN in the Hunt Order and change the station DN assignment.
• Delete – Delete station DN assignment to Hunt Order number.
5. Click Submit.
06 Muitple DN Hunt Enable if hunt group is created for multiple DN operation. Multiple DN hunt groups
should be circular with no pilot number.
Possible values: Enable or Disable (default)
07 DHG Auto Camp-on Whether to execute Automatic Camp On to the Distributed Hunt Group or not.
Possible values: Enable or Disable (default)
Should be applied to VM Distributed Hunt Groups so callers automatically camp on to
Voice Mail when all VM ports are busy. Does not apply to Circular or Serial hunt groups.
FIELD DESCRIPTION
Hunt Group Number Enter an existing Hunt Group number or use the List, Add, Append, Modify, or Delete
buttons as described above.
Possible values: 1~640 (default = no value)
01 Hunt Order This field assigns a station DNs position within a Hunt Group’s Hunt Order. The Hunt
Order is selected automatically by CTX WinAdmin. Programmers should assign the last
station in the Hunt Order first and assign the first station in the Hunt Order last.
Possible values: 1~560 (default = no value)
02 DN By selecting the Insert button you can add a new DN to the Hunt Group’s Hunt Order.
Enter the desired DN in the pop-up dialog box.
To modify an existing entry, use the Modify button as described above.
Possible values: Up to 5 ASCII characters (default = no value)
FIELD DESCRIPTION
To Next Page
Loading...
