Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 10-1
Operation
Operation 10
This chapter discusses CTX WinAdmin’s operational programming functions.
System Setup
Program Number(s): 900, 901, 902 and 915
These programs enable programmers to simulate system Power Off/On, initialize Strata CTX, check
software versions and set system clock and date.
1. From the Program Menu, click
Operation > System Setup.
2. Click Restart CTX to reset Strata
CTX
...or click Initialize CTX to delete
programmed data and revert to
default settings.
3. 901 CTX Version data is for
viewing only.
4. Set Strata CTX date and time.
5. Click Submit.
To Next Page
Loading...
