Toshiba Strata CTX28 - Lcr Route Definition Assignment; Modified Digits Table Assignment

Services
LCR/DR
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-27
Services
525 LCR Route Definition Assignment
Prerequisite Program: 520 page 9-24
This command assigns Route Definitions for LCR. A Route Definition consists of an OLG and a Digit
Modification index.
526 Modified Digits Table Assignment
Prerequisite Program: 521 page 9-25
This command modifies LCR dialed numbers by deleting digits from and adding digits to the dialed
numbers.
FIELD DESCRIPTION
1~128
Select the Route Definition number.
Possible values: 1~128 (default = no value)
0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 1)
Select the OLG Number associated with this Route Definition.
Possible values: 1~128 (default = 1)
1~128
(default = 1)
Select the Digit Modification number associated with this Route Definition.
FIELD DESCRIPTION
00 Digit Modification Index
Select the Digit Modification Index used by the LCR Route Choice table to determine
the digit modification treatment to be applied. Leading digits of a dialed number may
be deleted; leading and trailing digits may be added to the dialed number.
Possible values: 1~128 (default = no value)
01 Delete Digits
Select the quantity of digits to be deleted from the beginning of dialed number.
Possible values: 0~10 (default = 0)
02 Add Leading Digits
Enter the digit string to be inserted at the beginning of the number.
Possible values: Up to 23 ASCII characters (default = no value)
03 Add Trailing Digits
Enter the digit string to be inserted at the end of the number.
Possible values: Up to 23 ASCII characters (default = no value)