Strata CTX Programming - Part 4: Appendices 6/04 B-1
System Error Codes
System Error Codes B
The following Error Code Tables are needed when programming Strata CTX670 using the button
programming method. Error Codes display on the programming DKT’s LCD.
Note The following error codes only appear when using the telephone button programming method.
These tables are provided for reference only. CTX WinAdmin will feature error codes in a future
release.
Common Error Code Table
Program Code Error Descriptions
Common
1 Invalid Program number.
2 Invalid value.
3
Invalid parameter designation
• Input parameter range error.
• Required sub-parameter data was not entered.
4 Invalid FB button pressed.
5
The time allotted to enter a modification in the desired field has been
exceeded.
6
Invalid parameter entry
• Incorrect characters entered
• Input method is wrong
7
Some settings carried out using the range function may not have been
programmed correctly.
16 Identification error
17 Required parameter is not entered.
18 Required parameter does not exist.
To Next Page
Loading...
