Applications, Tips and Tricks
Echo Cancellation and Volume Level Adjustments
A-16 Strata CTX Programming - Part 4: Appendices 6/04
Setting the IPT1020-SD Headset Transmit Volume
1. Press
+
+
+
+ROG
(simultaneously).
2. Press
.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume transmission level (see Table
A-14).
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED Off = without).
5. Press
+ROG
to set the above data.
6. Go off-hook and hang up.
Table A-14 Volume Level Transmitted from Headset Microphone
LEDS
Transmit Level
FB3 FB2 FB1
ON ON ON Level 7 (max.)
ON ON OFF Level 6
ON OFF ON Level 5
ON OFF OFF Level 4
OFF ON ON Level 3 (initial value)
OFF ON OFF Level 2
OFF OFF ON Level 1
OFF OFF OFF Level 0 (min.)
To Next Page
Loading...
