System
104 System Timer
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 4-11
System
104 System Timer
Prerequisite Program: None
This command assigns the system timers. System timers set a variety of times to control calls and features
for the Strata CTX.
1. From the Program Menu click
System > System Timer. System
Timer Assignment screen displays
(shown right).
2. Select the desired timer value for
each of the 19 fields.
3. Click Submit.
FIELD DESCRIPTION
01 ACB Callback Timer The Automatic Callback timer sets the time (5 ~ 180 seconds) that the callback will
be attempted before being cancelled.
Possible values: 5~180 sec. (default = 30)
02 ACB Cancel Recall
Timer
Select the ACB overall timer value. This value establishes a limit for registering a
callback. Once the timer expires, the callback will be cancelled.
Possible values: 5~180 min. (default = 30)
03 Park Recall Timer Select the Park timer value. This sets the length of time a call can remain in Park.
Possible values: 10~600 sec. (default = 120)
04 Camp-on Timer Select Camp-on timer value. This sets the time needed to remain off-hook prior to
Camp-on being automatically activated.
Possible values: 5~15 sec. (default = 10)
05 SMDR Valid Call Timer The length of time that a call should be active before being captured by SMDR. The
SMDR Answer timer sets a default time for when an outgoing call will be considered
to be answered for SMDR reporting when a true answer signal is not returned from
the public network. Setting the too time short will include calls that may not be
completed, setting the time too long may exclude short calls that are answered and
terminated in a short time.
Possible values: 0~180 sec. (default = 10)
06 Tandem Timer #1 Select timer for a Trunk-to-trunk connection for which neither CO Line has release
supervision, a timer is needed to release the call if no user monitoring has taken place.
Possible values: 0~3600 sec. (default = 300)
07 Tandem Timer #2 Provides the time to enable an external user to dial a digit to extend the disconnect
time when the connection is unsupervised. This feature is used primarily with DISA.
Possible values: 0~180 (default = 30)
08 Call Forward No Ans
Time
The System Call Forward No Answer timer specifies the time period that a phone will
ring prior to invoking the Call Forward operation.
Possible values: 1~180 sec. (default = 30)
To Next Page
Loading...
