Station
Paging Group
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 5-29
Station
Paging Group
502 Terminal Paging Group Assignment
Prerequisite Program: 200 page 5-1
Assigns Primary DNs to Paging Group(s).
1. From the Program Menu click
Station > Page Group.
2. Enter a DN number in the
Primary DN field.
...or select an existing record by
clicking one of the following
buttons:
• List – view a summary list of
programmed DKTs.
• Extended List – view a
detailed list of programmed
DKTs.
• Copy – Enter a DN in the Primary DN field and click Copy. Enter a new DN(s) to assign existing
Paging Group settings.
3. Select the desired values. See descriptions below.
4. Click Submit.
FIELD DESCRIPTION
00 Primary DN Enter the Prime DN of the station to be assigned to Paging Groups. A station may
belong to more than one paging group.
Note You can have up to 72 stations in a paging group in the Strata CTX100 and up
to 120 stations in a paging group in the Strata CTX 670. Any software release
before R1.01, M19 supports only 32 stations in a paging group for all CTX
system types.
Page Group capacity: CTX100 – 4 Page Groups; CTX670 Basic – 6 Page Groups;
CTX670 Expanded – 16 Page Groups
Possible values: Up to 5 ASCII characters (default = no value)
PG01~PG16 Check to assign the DN to this paging group. The number of Page Groups that can be
assigned are: 1~4 (CTX100); 1~8 (CTX670 Basic); 1~16 (CTX670 Exp.)
Possible values: On or Off (default)
Note Up to 120 stations may be assigned to a paging group in the Strata CTX 670
All Page Group Check to assign the DN to the All Page Group.
You can have up to 72 stations in a paging group in the Strata CTX100 and up to 120
stations in a paging group in the Strata CTX 670.
Possible values: On or Off (default)
All Emergency Page
Group
Check to assign the DN to the All Emergency Page Group.
You can have up to 72 stations in a paging group in the Strata CTX100 and up to 120
stations in a paging group in the Strata CTX 670.
Possible values: On or Off (default)