Telephone Button Programming
900 Series Programs
13-104 Strata CTX Programming - Part 3: Telephone Button Programming 6/04
System Admin Log
Use this command to Start/Stop the System Admin Log.
Program Number(s): 907
Prerequisite Program:
None
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG
4
4
4
4
4
.
At the PASSWORD= prompt, Enter your password and press
+ROG
.
At the PROG= prompt enter
and press
+ROG
.
1. Press
)%
. To run System Admin Log press
+ROG
(twice). You are sent to the PROG= prompt.
2. To Stop the log, press
)%
and press
on the dial pad.
3. Press
+ROG
twice and wait for the
352*
= prompt to appear before proceeding.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
FB Name FB Summary Value LCD Prompt
Admin Log On/Off
01
Enter
or
to Start or Stop Admin Log.
1:Start
2:Stop
1:START
2:STOP
To Next Page
Loading...
