Toshiba Strata CTX28 - DR Override by System Speed Dial

Services
509 DR Override by System Speed Dial
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-37
Services
571 Exception Numbers for Forced Account Codes
Prerequisite Program: 506 page 9-36
Up to four telephone numbers can be programmed as exceptions to the forced and /or verified account code
entries (including 911). These special codes enable numbers to bypass the verification process and proceed
unhindered.
509 DR Override by System Speed Dial
Prerequisite Program: None
This command assigns the COS, DRL, FRL and QPL values used by DR Override by Speed Dial.
1. Click Services > LCR/DR > DR
Override by System Speed Dial.
2. Select the COS, DRL, FRL and
QPL override values.
3. Click Submit.
FIELD DESCRIPTION
01 Exception Number 1 Enter a Forced Account Code Exception.
Possible values: Up to 4 digits
Exception 1 default = 911
Exception 2~4 default = no value
Note One of the assigned exception numbers should be 911. Exception
Numbers for Forced Account Code fields cannot be duplicated.
02 Exception Number 2
03 Exception Number 3
04 Exception Number 4
FIELD DESCRIPTION
01 Override COS Select the override COS value.
Possible values: 1~32 (default =1)
02 Override DRL Select the override DRL value.
Possible values: 1~16 (default =1)
03 Override FRL Select the override FRL value.
Possible values: 1~16 (default =1)
04 Override QPL Select the override QPL value.
Possible values: 1~16 (default =1)