Services
656 Node ID Assignment
9-54 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
656 Node ID Assignment
System Availability: Not available with CTX28
Prerequisite Program:
102 page 4-4
This program assigns up to four Network Node IDs to process incoming network calls. Each Node ID has
an overlap code. Strata CTX will substitute the Overlap Code for the Node ID before processing the call
further. A Network Directory Number consists of a Node ID and the desired node.
1. Click Services > Networking >
Node ID.
2. Enter Program 656 data.
3. Click Submit.
FIELD DESCRIPTION
01 Primary Node ID Enter the Primary Node ID for this node. This Node ID identifies the node
used for administering Strata Net.
Possible values: Up to 6 digits (default = no value)
Primary Overlap Code Enter the Overlap Code associated with the Primary Node ID. An Overlap
Code is the string of digits that replaces the Node ID to continue call
processing.
Possible values: Up to 4 digits (default = no value)
02 Node ID 2 Enter Node ID 2 for this node.
Possible values: Up to 6 digits (default = no value)
Overlap Code 2 Enter Overlap Code for Node ID 2.
Possible values: Up to 4 digits (default = no value)
03 Node ID 3 Enter Node ID 3 for this node.
Possible values: Up to 6 digits (default = no value)
Overlap Code 3 Enter Overlap Code for Node ID 3.
Possible values: Up to 4 digits (default = no value)
04 Node ID 4 Enter Node ID 4 for this node.
Possible values: Up to 6 digits (default = no value)
Overlap Code 4 Enter Overlap Code for Node ID 4.
Possible values: Up to 4 digits (default = no value)
To Next Page
Loading...
