IP Telephone Programming
BIPU-M and IPT Program Update
8-10 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
External FTP
When FTP server is “External FTP,” not CTX - Smart Media, nor WinAdmin machine, users will have to
provide all the information in the FTP information group.
Important! The External FTP Server must be used if IPT, BIPUs and/or CTX WinAdmin do not have the
same subnet address.
WinAdmin provides an External FTP list page to manage FTP information for “External” FTP servers.
This page can be used to add, modify and remove FTP Server information (user, password, IP address,
directory and file) for External FTP servers or WinAdmin local machine. The information will be stored in
a file on WinAdmin machine and will be provided in selection window when user clicks on “External
FTP” on the BIPU/IPT pages. This eliminates the need to enter the same FTP information for “External
FTP” servers each time the BIPU/IPT program update is run.
BIPU Program Update
Prerequisites
1. Make sure that the networking devices between BIPU and the FTP server meet the requirements for
IP-CTX (min 100Mb/s switching hub(s).
2. Create an account on the machine designated to be the FTP server.
3. Create a FTP virtual directory on the FTP server machine and specify the physical location of the
updated file on the FTP server machine.
4. The FTP server machine IP address should be configured such that is visible by the IPT IP address.
CAUTION! Do not run other updates simultaneously.
Programming
1. From the Program Menu, click
IP-Telephone > BIPU
Program Update. The BIPU
Update screen displays
(shown right)
2. Select card slot to be updated
3. Enter the FTP information.
4. Select BIPU Update option.
5. Click Start to begin the BIPU
update.
To Next Page
Loading...
