Services
Destination Restriction
9-34 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
534 DRL Exception Table Assignment
Prerequisite Program: 533 above
This program assigns a DRL Exception Table to an existing DRL table. If the DRL Table is an allow table,
its Exception Table must be a deny table and vice versa
111 DR Level
Prerequisite Program: None
This program enables credit card calling for a DRL.
DRL Table View
The DRL table view enables you to view all programmed DRLs. This table is a read only table.
¥
To access the DRL table view
¥
Click Services > LCR/DR > DRL
Table View.
See “Table Views” on page 2-8 for table
functionality.
FIELD DESCRIPTION
00 Destination Restriction
Level
Enter the DRL for which you want to populate an Exception Table.
Possible values: 1~16 (default = no value)
01 Dial String Add the dial string you wish to be treated as an exception.
Possible values: 1~ 7 digits may include wild cards “X” and “N” where X =
0~9 and N = 2~9.(default = no value)
02 Add/Delete Add or delete the string entered in 01 DR Exception Table above to the DR
Exception Table.
Possible values: Add or Delete (default)
FIELD DESCRIPTION
DRL Number Enter the DRL number.
Possible values: 1~16 (default = no value)
01 Credit Card Calling Enable Credit Card Calling for this DRL.
Possible values: Enable or Disable (default)
To Next Page
Loading...
