Toshiba Strata CTX28 - DID Intercept Assignments

Trunks
318 DID Intercept Assignments
6-16 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
318 DID Intercept Assignments
System Availability: Not available with CTX28
Prerequisite Program:
304 page 6-2
This command assigns the DID Routing table when DID numbers are undefined or not received.
1. Complete the “DID Intercept
Assignment Record Sheet” on
page D-26.
2. From the Program Menu, click
Trunk > DID Intercept.The DID
Intercept Assignments screen
displays (shown right).
3. Enter an ILG Number
...or click List to view a summary
list of programmed ILGs.
4. Enter DID Type in the 01 Type field.
5. Enter DID Intercept Assignment
data.
6. Click Submit.
FIELD DESCRIPTION
ILG Number Enter ILG number.
Possible values: 1~32 (CTX28 & CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp), (default = no value
01 Type No DID, set destination that should ring when the DID number received does not
match DID numbers in this group’s DID table.
Not Determined, set the destination that should ring when the normal programmed
ringing destination is disconnected.
Possible values: No DID (default) or Not Determined
02 MOH Source Select Music On Hold
Possible values: External 1~15 (default = External 1)
03 Group CO Destination GCO Key Group number.
Possible values: 0~32 (CTX28 & CTX100), 0~50 (CTX670 Basic),
0~128 (CTX670 Exp), (default = 0)
04 Pooled Line Group POOL Line Key Group Number.
Possible values: 0~32 (CTX28 & CTX100), 0~50 (CTX670 Basic),
0~128 (CTX670 Exp), (default = 0)