Services
LCR/DR
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-25
Services
521 LCR Route Plan Digit Analysis Assignment
Prerequisite Program: 520 page 9-24
This program builds the basic LCR Analysis Table.
522 LCR Exception Number Route Plans
Prerequisite Program: 521 page 9-25
This command assigns up to 1280 dialed external digit strings to the Route Plan Exception Analysis Table
which assigns each string to 1 of 64 Route Choice Tables. The values expressed here are exceptions to the
values established in Program 521.
FIELD DESCRIPTION
00 Analysis Digits
Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to be
assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table may have 1280
members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and N =
2~9 (default = no value).
01 Route Plan Number
Enter the Route Plan number to which to assign the Analysis Digits.
Note
Entering 0 deletes the Analysis Digits from the table to which they had been
assigned.
FIELD DESCRIPTION
00Exception Route Plan Table
Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to be
assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan Analysis Table may
have 1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and N =
2~9 (default = no value).
01Exception Route Plan
Enter the Route Plan Table in which to assign the Exception Digits.
Note
Entering 0 deletes the Exception Digits from the table.
To Next Page
Loading...
