Station
Hunt Group Table View
5-28 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Hunt Group Table View
Hunt Group Table View
enables you to view all hunt
groups and its members.
¥
To access the Hunt Group
Table View
¥
Select Station > Hunt
Group Table View.
See “Table Views” on
page 2-8 for table
functionality.
Note This table has more
functions in addition to
the regular
functionality found in
other table views.
The Navigation Bar has the following additional buttons:
• Delete – Click on a row to delete any directory number from a Hunt Group, then click the Delete
button. When the Delete button is active, the Add button and the Delete Group button will not be active.
To unselect a row that is selected (in yellow), click the row again.
• Add – To add directory numbers to a hunt group select the
Hunt group in the table view from the Navigation drop down
in the Navigation bar, then click the Add button.
If no rows are selected, the Add button is active. Click the
Add button to add members to Hunt groups. When you click
the Add button, the Add dialog box displays (shown right).
Select the DN from the Available Directory Numbers box,
then click the Arrow button in the center. This moves the
DN to Hunt Group box on the left. Click Add now to Save
the entry or Cancel to cancel. Clicking Add Now
automatically refreshes the table view.
In the dialog box shown right, if you want 6200 to appear
before 5200, click 6200 on the right, then click 5200 on the
left and then click the arrow in the center.
• Select All and Unselect All – Clicking these buttons, selects
or unselects all groups in a table.
03 DN Set Type Modify (replace) an existing assignment.
Possible values: Modify (default) or Insert
FIELD DESCRIPTION
To Next Page
Loading...
