Toshiba Strata CTX28 - Equipment Programming Error Codes

System Error Codes
Equipment Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-27
System Error Codes
Equipment Programming Error Codes
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions
801
49
)%
Server Port Number must be entered when PC Operation
Type is set to Server, or Client Port Number must be entered
when PC Operation Type is set to Client.
49
)%
If a CTI value (200~208) is assigned to the Logical Device in
Program 803, then Data Flow must be set to
Asynchronization.
49
)%
When PC Operation Type is set to Client, the Client Port
Number cannot be deleted.
49
)%
When PC Operation Type is set to Server, the Server Port
Number cannot be deleted.
50
)%
When “Server” is selected, the Server Port number (FB04) is
not able to assign “0”. When “Client” is selected, the
connecting port number (FB06) is not able to assign “0”.
50
)%
When “Server” is selected, the Server Port number (FB04) is
not able to assign “0”.
50
)%
When “Client” is selected, the connecting port number (FB06)
is not able to assign “0”.
80
)%
The values assigned in Program 803 conflict with related I/O
Logical and Physical Device assignments.
803
49

The selected port conflicts with existing devices, such as CTI,
etc.
50

The Physical Device assignment conflicts with existing serial
number assignments.
804 80

The values assigned in Program 803 conflict with related I/O
Logical and Physical Device assignments.