Toshiba Strata CTX28 - COS Override Assignment

Services
509 DR Override by System Speed Dial
9-38 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
510 COS Override Assignment
Prerequisite Program: None
Assigns Class of Service Overrides and their parameters (COS, FRL, DRL, QPL).
1. Complete the “COS Override Code
Record Sheet” on page D-40.
2. Click Services > System Param > COS
Override.
3. Enter Program 510 data or Select a COS
Override Index and click Copy to copy
settings from the selected COS Override
Index.
4. Click Submit.
FIELD DESCRIPTION
00 COS Override Index Select the COS Override index.
Possible values: 1~16 (default = no value)
01 COS Override Code Select the COS Override Code as entered by users. If no data is entered in this
field, any previously entered data is erased.
Possible values: Up to 8 ASCII characters (default = no value)
02 Set COS Select COS number for this override code.
Possible values: 1~32 (default = 1)
03 Set DRL Select DRL number for this override code.
Possible values: 1~16 (default = 1)
04 Set FRL Select FRL number for this override code.
Possible values: 1~16 (default = 1)
05 Set QPL Select QPL number for this override code.
Possible values: 1~16 (default = 1)
06 Set Network COS Select Network COS index for this override code.
Possible values: 1~32 (default = 1)