Toshiba Strata CTX28 - All ISDN Trunk Trace; Event Trace Side Change

Telephone Button Programming
900 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-103
Telephone Button
Programming
All ISDN Trunk Trace
Program start/stop of packaged detailed collection of event trace functions. This program is only available
in the telephone button programming mode.
Program Number(s): 905
Prerequisite Program:
“Format/Unmount SmartMedia” on page 13-105, “ISDN Trace Location” on page 13-102,
“ISDN Trace Location” on page 13-102 and “Event Trace Control” on page 13-100
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG 4  4  4  4  4 .
At the PASSWORD= prompt, Enter your password and press
+ROG .
At the PROG= prompt enter
 and press +ROG .
1. Press )% .
2. Select
 , or  to turn on or off.
3. Press
+ROG twice to execute.
4. Press
+ROG to return to the PROG= prompt.
5. Enter another program number to continue programming or press
+ROG again to exit programming
mode.
Event Trace Side Change
This program enables you to manage your ISDN protocol trace. This program is only available in the
telephone button programming mode.
Program Number(s): 906
Prerequisite Program:
“Format/Unmount SmartMedia” on page 13-105
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG 4  4  4  4  4 .
At the PASSWORD= prompt, Enter your password and press
+ROG .
At the PROG= prompt enter
 and press +ROG .
1. Press )% .
2. Select
 ,  , or  to select parameter.
3. Press
+ROG to execute.
4. Press
+ROG to return to the PROG= prompt.
5. Enter another program number to continue programming or press
+ROG again to exit programming
mode.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
FB Name FB Summary Value LCD Prompt
Trace All ISDN
Trunks
01
Output All ISDN Trunk Events to
SmartMedia.
1:On (default)
2:Off
1:ON
2:OFF
FB Name FB Summary Value LCD Prompt
Side Change
01
Enter desired parameter number.
1:Message
2:ISDN
3:Message+ISDN
1:MESSAGE
2:ISDN
3:MESSAGE+ISDN