System
Day Night Service
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 4-23
System
112 Day/Night Mode Calendar
Prerequisite Program: 106 on page 4-23
This program enables you to assign Working Day Types for up to 128 unique Calendar Days. These
settings override the default system schedules in Strata CTX to enable Day/Night scheduling for unique
circumstances.
106 Day/Night Mode “Type of Day” Mapping Table Assignment
Prerequisite Program: 113 on page 4-24
The Day of the Week schedule defines each day as the type of day the schedule shall follow. These types of
days are called Work Day, Non-work Day, and Holiday. Each day of the week can be classified.
FIELD DESCRIPTION
Tenant Number Select the Tenant number for which the daily schedules will be configured. (This
feature is available with CTX R2.2 or higher and CTX WinAdmin R2.2G.0 and
higher.)
Possible values:1~8.
00 Calendar Day Enter the Calendar Day for which to assign a Working Day Type schedule.
Possible values: YYYY = Year, MM = Month, DD = Day (default = no value)
01 Working Day Type Select the Working Day Type.
Possible values: Delete (default), Work Day, Non-Work Day or Holiday
FIELD DESCRIPTION
Tenant Number Select the Tenant number for which the daily schedules will be configured. (This
feature is available with CTX R2.2 or higher and CTX WinAdmin R2.2G.0 and
higher.)
Possible values:1~8.
01 Monday Assign the type of day schedule that is to be used for each day of the week.
Possible values: Work Day (default), Non-work Day or Holiday
02 Tuesday
03 Wednesday
04 Thursday
05 Friday
06 Saturday Assign the type of day schedule that is to be used for each day of the weekend.
Possible values: Work Day, Non-work Day (default) or Holiday
07 Sunday
To Next Page
Loading...
