System
102 Flexible Access Codes
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 4-5
System
Creating New Feature Codes
1. Click on the Create button.
2. Enter new feature/access code. Click Ok. WinAdmin will start a refresh cycle, when your complete
screen will change to a gray (edit mode) color and the feature/access code will be red.
3. From the Feature Name drop down menu select the feature to be assigned.
4. Submit your data.
Notes
• To range program feature/access codes use a “*” between a range of values and a “,” for an additional
entry not in a range.
• System Date and Time Access Codes – These functions require CTX R1.02, MA227 or higher
software. The system date adjust code and system time adjust code is different for every system. The
defaults are #651 and #652 respectively.
Important! If you backup a CTX database (default.dat) with a CTX software that does not support Time/
Date access codes and then restore it to a CTX software that supports these access codes,
you must use this program to set the Time/Date access codes. This must be done to allow end
users to set the Time/Date from their LCD digital telephones.
Flexible Numbering Default Settings
Table 4-1 shows the default Flexible Numbering Feature and Flexible Numbering Plan code relationships.
Pressing the Flexible Numbering Plan code from any station enables users to directly access the Flexible
Numbering Feature. The Feature Index Codes will display on the LCD of the telephone once the Default
Access Codes are entered.
Note These three-digit Feature Index Numbers should not be confused with the Program 205 three-digit
Button Codes.
Table 4-1 Flexible Numbering Plan Default Settings
Flexible Numbering Feature
Feature
Index
Default
Access Code
Programmed
Value
No Data
ABR - Activate 150
ABR - Cancel 151
Call Park Orbits - Activate 170
Call Park Orbits - Park Answer (Retrieve Parked Call) 173
System Orbit Number 174
a
DND -Local Activation 180
DND -Local Cancellation 181
DND -Remote Activation 182
DND -Remote Cancellation 183
Door Lock Control -Unlock 190
Door Phones -Call 191
Flash -short 200
Flash -long 210
Group Paging -Invoke All Group Paging 220
Group Paging -Invoke Individual Group Paging 230
Answer for External Group Paging 232
Emergency Page -Invoke All Emergency Paging 240
Emergency Page -Invoke Individual Emergency Paging 250
Originate Call by Terminal Speed Dial (Index: 00-99) 260
To Next Page
Loading...
