Toshiba Strata CTX28 - All Isdn Trunk Trace Selection; Change Trace Side; ISDN Trace Location

Maintenance
Event Trace Control
11-4 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
904 ISDN Trace Location
ISDN protocol event trace collection conditions are established using this program.
Note This trace can be performed on BSU and PTU cards only.
905 All ISDN Trunk Trace Selection
906 Change Trace Side
FIELD DESCRIPTION
Cabinet/Slot/Port Enter the Equipment Location to be traced (xxyyzz).
Possible values: xx = Cabinet 01~07; yy = Slot 01~10; zz = Circuit 01~04
Trace Kind Select the trace collection level.
Possible values: LLCI Trace, Layer 2, Layer 2 & Layer 3 Trace, State Transitions
Trace, ERRORS Trace, Layer 2 Trace.
Trace Level Select the extent to which the trace collects information.
Possible values: No Trace (default), Brief or Extensive
FIELD DESCRIPTION
Trace all ISDN Trunks Select whether to trace all ISDN PRI and BRI trunks.
Possible values: On (default) or Off
FIELD DESCRIPTION
Trace side Select Trace side change.
Possible values: Message Trace (default), ISDN Trace or Both