Services
LCR Overview
9-16 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
LCR Overview
LCR Analysis Process
The flowchart below represents the process by which Strata CTX analyzes dialed digits and makes LCR
decisions. The graphic is divided into four areas each described below. DR and call connection are
described elsewhere in this document and are shown here only for their roles in the LCR process.
Figure 1 LCR Analysis Process Flow
DR
LCR begins with the receipt of a dial string from a facility capable of originating an outgoing call: station,
automated attendant, Tie trunk, DISA trunk, DID trunk, etc. The dial string is identified as an LCR call by
the presence of the LCR Feature Access Code—typically
. The LCR Access Code is removed and the
remaining external digits are processed.
DESTINATION RESTRICTION (DR)
CONNECTION
TIME OF DAY
ROUTE ANALYSIS
LCR
Receive
dialed digits
Home
area code
included?
Allow
LCR DR?
Insert home
area code
Stop
Select Routing
Analysis Plan
(1~64)
Dial string
match?
Use Default
Route Plan
Exception
Table?
Get Route
Plan from
Analysis Table
Get Route Plan
from Exception
Ta ble
Route Plan
Schedule
Tab le
Stop
Check FRL
(1~16)
Time of
Day
Zone 1 Zone 2
Zone 3
Type of
Day
Weekday
Weekend
Holiday
Make LCR
Route Choice
Hunt available
Route
Definition
(1~6)
Apply Digit
Modification
Connect
and
send
No
Yes
No
Yes
No
Yes
No
To Next Page
Loading...
