Services
Strata Net QSIG Over IP
9-66 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
577 Caller History
Prerequisite Program: None
Accounting Codes need to be specified for the number of digits that are expected to be used for registering
the number. This allows the dialing within the system to proceed automatically once the correct account
code is dialed, the following numbers are then dialed digits used for making the phone call. A second
length is provided to allow the number of digits to be used for verification of the code to be less than the
total code entered, thus the code may contain two parts, one required and one part optional to the user.
1. Complete the “Call History Record
Sheet” on page D-51.
2. Click Services > Miscellaneous >
Behind Connection.
3. Click Submit.
FIELD DESCRIPTION
Ckt Type/Number Enter the Circuit Type and number. See the Table 9-2 below.
Possible values: Up to 6 digits (default = no value)
01 Primary DN Enter Station DN to store call history data.
Possible values: Up to 5 digits (default = no value)
Table 9-2 Circuit Type Code Definitions
Circuit Name Circuit Type Circuit Number Example
DN 1 0~99999 (DN) if DN is 200, value is 1200
CO 2 1~264 (Trunk Number) if CO is 30, value is 230
GCO 3 1~128 (GCO Key Group Number) if GCO is 50, value is 350
POOL 4 1~128 (POOL Key Group Number) if POOL is 80, value data is 480
To Next Page
Loading...
