Toshiba Strata CTX28 - PAD Group Assignment

System
PAD Table
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 4-27
System
108 PAD Group Assignment
Prerequisite Program: None
You can enter up to 32 additional devices to the PAD table to deal with exceptions to the default table.
FIELD DESCRIPTION
00 PAD Group Device Type Enter the Device Type.
Possible values: Up to 6 digits. See Table 4-3 for device type and number.
x = Device Type
y = Device number (1~5 digits)
(default = no value)
01 PAD Group Number Enter the PAD Group Number.
Possible values: 0~6 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Exp.)
(default = 0)
Table 4-3 Program 108 PAD Group Device Type Examples
Device Name
Device
Type
(x)
Device Number
(y)
Example
DKT, SLT, ISDN, IPT Station 1 0~99999 (PDN) if DKT device = 200, value = 1200.
ISDN or IP QSIG
Channel Group
2
1~128 (Channel Group No. per
Prog. 302)
if Channel Group # = 10, value = 210.
Analog Trunk, T1 Trunk 3 1~264 (Trunk Number) if Trunk # = 120, value = 3120.
Conference Bridge 4
none (Conference Bridge is only
one)
value = 4.
Music Source 5 1~15 (Music Port) if Music port = 8, value = 58.
External Paging Device 6 1~8 (Zone Relay Number) if External Paging Device = 3, value = 63.