Services
Strata Net QSIG Over IP
9-64 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Miscellaneous
The Strata CTX system can monitor SMDR, Call History and Behind Centrex. Use the following programs
to set up these services.
SMDR
The following enable programming for SMDR, Call History and Behind Connection settings.
Program Number(s): 512, 513 and 514
The following programs assigns system-wide SMDR parameters.
1. Click Services > Miscellaneous >
SMDR.
2. Enter Program 512 data.
3. Enter Program 513 data.
4. Enter Program 514 data.
5. Click Submit.
512 SMDR for System Assignment
Prerequisite Program: None
This table translates a Network COS received as part of a Traveling Class Mark to a local Class of Service
for access to local services. There is no translation of Outgoing Network COS.
FIELD DESCRIPTION
01 Caller ID Field
Include Caller ID records in SMDR.
02 B-Record for Abandoned
Call
Generate B Record for an abandoned call.
Possible values: Enable or Disable (default)
03 Automatic Number
Identification (ANI)
Include ANI in SMDR record.
Possible values: Enable (default) or Disable
04 Authorization Code
Include authorization codes in SMDR records.
Possible values: Enable or Disable (default
05End-of-Record CR Include a Carriage Return (CR) at the end of an SMDR record.
Possible values: Enable (default) or Disable
To Next Page
Loading...
