CTX WinAdmin Overview
CTX WinAdmin Main Screen
2-2 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
CTX WinAdmin Main Screen
After you start CTX WinAdmin, log in and connect to the CTX, the main screen (shown below) displays.
Verify the information on this screen. It contains the System type and Software version.
• Auto Flyover On/Off Button – You can click this toggle button to turn on or turn off flyovers.
• Program Menu – The primary tool used to navigate through CTX WinAdmin. Click the Expand or
Collapse buttons at the upper left corner to expand or collapse the Program menu.
Note The CTX28 Program menus are different compared to the CTX100 and CTX670. For the Expanded
view of all the CTX28 menus, see “CTX28 Programming Menus” on page 2-3.
• Program Viewer – This area is where the various programs and parameters are displayed as you
navigate through CTX WinAdmin.
Notes
• You can verify the Strata CTX system type (CTX100 or CTX670) and the software version on the Title
screen shown above.
• The software version is organized as follows:
O
Example: AR1.01 M0010.00
O
A = Country code (USA, Canada, Mexico).
O
R1.01 = CTX Release 1.01
O
M000xx.00 = Strata CTX software version.
Program Viewer
Program Menu
Auto Flyover On/Off Button
7376
To Next Page
Loading...
