Services
Strata Net QSIG Over IP
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-65
Services
513 SMDR for ILG Assignment
Prerequisite Program: None
This program assigns SMDR parameters for ILGs.
514 SMDR for OLG Assignment
Prerequisite Program: None
This command assigns SMDR parameters for OLGs
FIELD DESCRIPTION
00 Incoming Line Group (ILG)
Specify the ILG for which to set SMDR parameters.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic), 1~128 (CTX670 Exp.)
(default = no value)
01 Generate SMDR Records
Enable to generate records for this ILG
Possible values: Enable (default) or Disable
02 DNIS Field Indication
Check to include DNIS information in records for this ILG.
Possible values: Enable (default) or Disable
03 B Record for Incoming Call
Enable B Record generation for incoming calls with or without incoming SMDR
being enabled.
Possible values: Enable or Disable (default)
04 Abandoned Call Record
Output
Enable record generation for abandoned calls. Incoming SMDR must be turned
on. Abandoned call records will be generated whether or not incoming SMDR
has been set.
Enable or Disable (default)
05 Display Transferred Call
Records
Select whether to charge a transferred call to the source or destination party.
Possible values: Source (default) or Destination
FIELD DESCRIPTION
00 Outgoing Line Group
(OLG)
Specify the OLG for which to set SMDR parameters.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.)
02 Outgoing Records Generate records for outgoing calls. SMDR Record Display must be Enabled.
Possible values: Enable (default) or Disable
03 Charged Station Apply the SMDR record of a transferred call to its source or its destination.
Possible values: Source (default) or Destination
To Next Page
Loading...
