Services
Destination Restriction
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-33
Services
Destination Restriction
Program Number(s): 532, 533, 534 and 111
Assign Destination Restriction (DR) features for the Strata CTX.
1. Complete the “DR Record Sheets” on
page D-39.
2. Click Services > LCR/DR >
Destination Restriction.
3. Enter 00 DR Level (DRL).
4. Enter Program 532 data.
5. Enter Program 533 data. Click List to
view a summary list of programmed
Dial Strings.
6. Enter Program 534 data. Click List to
view a summary list of programmed
Dial Strings.
7. Enter Program 111 data.
8. Click Submit.
532 DR Table Allow/Deny Definition
Prerequisite Program: 533 below.
Specify the Destination Restriction (DR) Table Type using this command.
533 DR Level Table Assignment
Prerequisite Program: None
This program adds or deletes entries in the DR Table associated with the DRL entered in Step 3 above.
FIELD DESCRIPTION
00 DRL Number Select the DRL Number.
Possible values: 1 ~ 16 (default = no value).
01 Type of Table Specify whether this DR Table is an Allow Table or Deny Table.
Possible values: Allow or Deny (default).
FIELD DESCRIPTION
00 Destination Restriction
Level
Choose the DRL.
Possible values: 1 ~ 16 (default = no value)
01 Dial String Enter the string of dialed digits to be allowed or denied. Wild cards (X and N)
can only be assigned through CTX WinAdmin, not the programming phones.
Possible values: 1~7 digits (default = no value)
02 Add/Delete Add or delete the string entered in 01 Dial String above to the DR Table.
Possible values: Add or Delete (default)
To Next Page
Loading...
