Services
540 Pilot DN Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-5
Services
580 Voice Mail Port Data
Prerequisite Program: None
Assign characteristics of individual voice mail ports.
1. Complete the “Voice Mail Port
Data Record Sheet” on page D-39.
2. Click Services > Voice Mail >
Voice Mail Port Data.
3. Enter a VM Port DN
...or click one of the following
buttons:
• List – view a summary list of
programmed VM Port DNs.
• Copy – Enter an VM Port DN
value in the field with the same
name. Click Copy to make a
new VM Port DN assignment
with settings copied from the Port entered in VM Port DN.
4. Enter Program 580 data.
5. Click Submit.
FIELD DESCRIPTION
00 VM Port DN
Enter the DN of an individual VM port. For direct transfer to voice mail, enter the
remote Node ID and Pilot DN.
Note
Do not enter a Pilot DN. This feature is available only with CTX Release 1.3
or higher software and with CTX WinAdmin Release 1.3 or higher software.
Possible values: Up to 5 digits (default = no value)
01 Control Method
Specify In-band or SMDI integration. Select SMDI for Remote voice mail.
Possible values: Inband or SMDI (default = no value)
02 Send A/D Tone
Select whether Strata CTX sends A or D tone when a station connecting to
voice mail answers or disconnects.
Possible values: Enable or Disable (default = no value)
03 Send B Tone
Enable Strata CTX to send B tones in the event of a Blind Transfer Recall.
Possible values: B Tone, No Tone or B Tone and Extension Number (default =
no value)
04 End-to-end
Enable Strata CTX to send DTMF tones to voice mail in response to key
presses from a digital telephone.
Possible values: Enable or Disable (default = no value)
07) VM to VM Call Blocking
Set to blocking to prevent Voice Mail Auto Attendant, supervised transferred,
calls from forwarding back into Voice Mail.
Possible values: Blocking or Non-blocking (default)
To Next Page
Loading...
