Station
Assignment
5-4 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
19 VMID Code SMDI Enter the voice mail box number that should answer calls when this PDN calls
voice mail; or, when this PDN is called and then forwards to voice mail (this number
is prefixed by codes in Program 579, 11~16)
Possible values: Digits 0~9, * and #, up to 10 characters (default = no value).
Note This VMID code is sent to the voice mail device in SMDI packets or DTMF
tones on direct calls to voice mail from the PDN; and on calls to the PDN
that forward to voice mail. See Program 580 for SMDI or DTMF choice.
22 MW to VM Port Enter the Message Waiting center DN. For Remote CTXs, assign message center
including Node IP for TPI integration. This parameter enables Call Record function
too.
Possible values: Up to 7 ASCII characters (default = no value)
23 Travelling COS
Change
Enable this station with the privilege to change the Travelling COS Override Code.
Possible values: Enable or Disable (default)
24 TGAC Override
1
Enable Trunk Group Access Code (TGAC) override (for Attendant console) from
this station.
Possible values: Enable or Disable (default)
25 Service Tones Disable Service Tone for Data Privacy.
Possible values: Enable (default) or Disable
Note Service tone such as Call Waiting should be disabled for modems, faxes,
and similar devices.
26 CW and ROB Tone Enable/Disable the station to receive Call Waiting (Campon) and Ring Over Busy
Tone .
Possible values: Enable (default) or Disable
Notes
• CW tone is always two beeps.
• ROB tone can be two beeps or continuous as set in PRG 204, 27.
27 Name Display Enable this station with the privilege to put the user name in the Directory
Assistance display of a large LCD.
Possible values: Enable (default) or Disable
28 Door Ovr DND Enable DND override by door phone.
Possible values: Override or Do not Override (default)
30 Chg Sys Speed Enable this parameter to program System Speed Dial.
Possible values: Enable or Disable (default)
31 Network COS Select Network COS value.
Possible values: 1~32 (default = 1)
32 Auto OCA OCA occurs automatically when making a call to a busy station that allows OCA
calls to be received.
Possible values: Enable or Disable (default = Enable)
33 Originate OCA Enable this station with the privilege to make OCA calls to other stations.
Possible values: Enable (default) or Disable
FIELD DESCRIPTION
To Next Page
Loading...
