Toshiba Strata CTX28 - Page 219

Services
540 Pilot DN Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 9-3
Services
FIELD DESCRIPTION
01 DID/DNIS VMID Option
Select DN VMID to send the DN’s VMID to voice mail on DID/DNIS calls that are
answered and then transferred to a DN which then forwards to voice mail.
Select DID/DNIS VMID to send the DID/DNIS number’s VMID to voice mail on DID/
DNIS calls that are answered and then transferred to a DN which then forwards to
voice mail.
Possible values: DN VMID (default), DID/DNIS VMID.
If a DID/DNIS call is answered by a station and then transferred to a DN which then
forwards to voice mail, the VMID of the DID/DNIS number (Program 309,
)% or
)% ) or the VMID of the forwarding DN (Program 200, )% or 206, )% ) will be
sent to voice mail per this option.
Note
The DID/DNIS number’s VMID (Program. 309, )% or )% ) is always sent to
voice mail on DID/DNIS calls that ring directly to voice mail or ring a DN which
then forwards to voice mail before it is ever answered.
02 Cancellation Method
for VM MW
Select the method used to cancel Voice Mail message waiting indication.
Possible values: Auto and Access Code Cancel or Access Code Cancel (default)
03 Message Desk Number
Enable to send the SMDI Message Desk Number (001) in the SMDI packet;
otherwise, 000 for a station call or the 3-digit CO line number is sent.
Possible values: Enable or Disable (default)
04 Output of CLASS / ANI
and DNIS
Enable to include Caller ID/ANI numbers in SMDR records.
Possible values: Enable or Disable (default)
05 Calling Number Digits
Sent to VM
Select how many calling number digits to send to the VM unit.
Possible values: 2~10 digits (default = 10)
Note
If 04 Output of CLASS / ANI and DNIS is enabled, this value must be 10.
06 Blank Digits Sent to VM
Send SMDI-Bellcore Standard VM Interface.
Possible values: 1 or 2 (default).
• 1 = 1985 (single space)
• 2 = 1991 (two spaces).
07 Auto Cancel of VM and
MW
1
Setting of auto cancel of VM and MW.
Possible values: Enable (default) or Disable
08 DTMF Duration
Select VM ID Code and System DTMF Signal Time.
Possible values: 80 ms (default) or 160 ms
09 LCD Control of Voice
Mail
Enables Toshiba Proprietary Integration (TPI) for Soft Key Control of VM. TPI and
Soft Key Control of Voice Mail requires Stratagy Enterprise Server Release 3.x or
higher.
Possible values: Enable (default) or Disable
10 Central VM Callback
Enter the pilot DN for the centralized voice mail system. If this field is left blank, the
previously stored number will be deleted.
Possible values: Up to 7 ASCII characters (default = no value)