Strata CTX Programming Guidelines
Step 1: Use Default Auto-programming to Start Up
1-10 Strata CTX Programming - Part 1: Getting Started 6/04
Note To log into GVMU boxes for the first time, enter the default telephone station number plus 997.
Example: for Station 200, enter 200997 as the Voice Mail ID.
Table 1-16 Program 313 Default Data
Caller
ID
Prog 313 Function CTX28 default
FB1 Caller ID Receive Method
nothing
/ANI-MCI/ANI-Sprint/
CLASS
CLASS
FB2
Caller ID Identification
Notice Contents
ANI and DNIS/
DNIS/DID ANI or DNIS
under line is CTX100’s default
Note Class Equipment number is not required for CTX28 because CLID circuits are built-in and
dedicated to each CO line.
Table 1-17 Program 100 Default Data
Virtual Slot
Equip. Nos.
Circuits
PCB
Code
Station Line
Numbers
Connection
0101 8 - Digital Telephones (no spkr OCA) 017 200~207
GMAU1A
(motherboard)
0102 3 - CO lines, with CLID 028 CO1~CO3
0103 Not used
0104 Standard Telephone 01~02 026
01~208
02~217
01-GMAU1A
02-GSTU1A
0105 4 - Voice Mail ports
026
220~223 GVMU1A
0106 Not used
0107 8 - Digital Telephones 017 209~216
GCDU1A
0108 3 - CO Lines with CLID 028 CO4~CO6
0205 Virtual BIOU 020
Relay Contact
Page, MOH
GCTU1A
*Slot codes are set during system initialization and cannot be changed.
Table 1-18 Program 200 Default Data
GMAU
FB0 DN 200 201 202 203 204 205 206 207 208
FB1 EQUIP 010101 010102 010103 010104 010105 010106 010107 010108 010401
FB2 DKT DKT DKT DKT DKT DKT DKT DKT SLT
FB3 Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext.
FB19 VM ID 200 201 202 203 204 205 206 207 208
FB22
VM MW
Center Port
220 220 220 220 220 220 220 220 220
Table 1-19 Prog 200 Default Data
GCDU GSTU
FB0 DN 209 210 211 212 213 214 215 216 217
FB1 EQUIP 010701 010702 010703 010704 010705 010706 010707 010708 010402
FB2 DKT DKT DKT DKT DKT DKT DKT DKT SLT
FB3 Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext.
FB19 VM ID 209 210 211 212 213 214 215 216 217
FB22
VM MW
Center Port
220 220 220 220 220 220 220 220 220
To Next Page
Loading...
