Telephone Button Programming
100 Series Programs
13-12 Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Note These three-digit Feature Index Numbers should not be confused with the Program 205 three-digit
Button Codes.
Table 13-2 PCB Codes
Code PCB Type
Assigned
Name
Circuit/Type Code PCB Type
Assigned
Name
Circuit/Type
000 None
No Card or
Delete Card
n/a 011 EMU
REMU
BVPU
4 Circuits
001 COU
RCOU
RGLU2
4 Loop Lines
8 Gnd./Loop Lines
012 BSU RBSU 2 S/T interfaces
002 STU RSTU2 8 Stations 013 BSU_BSS RBSU+RBSS 4 S/T interfaces
003 DKU
PDKU2
RWIU
8 Stations
8 or 32 wireless
014 PTU RPTU 8, 16 and 24 PRI Lines
004 Not used n/a n/a 015 BUU RBUU 2 U Interfaces
005 8COU RCIOU+RCOS 8 Loop CO Lines 016 BUU_BUS RBUU+RBUS 4 U Interfaces
006 DDU RDDU 4 DID Lines 017 NEW_DKU_8 BDKU1 8 Stations
007 DTU RDTU2
8, 16, 24 and 30 channel
T1
018 NEW_DKU_16 BDKU1+BDKS1 16 Stations
008 DSU RDSU
4 Standard Ports
4 Digital Ports
019 IOU1 BIOU Page/MOH/BGM Relay
009 CIU RCIU2 4 or 8 Circuit Caller ID 020 IOU2 BIOU Page/MOH/BGM Relay
010 MCU RMCU 2 or 4 E911 CAMA Lines
Table 13-3 Program 102
Button Sequence Value(s) Summary
102
Flexible Access Plan
,
+ROG
Assigns feature access codes, individual line access codes and
outgoing line group (OLG) access codes to the Flexible Numbering
Plan.
Does not include PDNs, PhDNs, Pilot numbers, or Hunt Group pilot
numbers.
102-00
Access Code
n,
+ROG
,
n = Up to 5-digit Flexible
Numbering Plan
Enter the digits to be dialed (0~9,#,*) to access a Feature or an
Outgoing Line Group (OLG).
To delete, select ‘ No Data‘ in ‘ 01 Feature Name‘ . Conflict with an
assigned DN will produce an error.
102-01
)%
, nnn,
+ROG
nnn = 3 digit Feature Code (551
should be selected for a
Flexible Numbering OLG)
Select the Feature to which the access code is being assigned.
Note To assign an access code to an Outgoing Line Group (OLG),
select “Line Group access code - one access code for each
OLG.” To assign the prefix digit(s) for the access code of
individual lines, select “Line access code - leading digit(s) to
access individual lines.” Example: If #7 is selected as the line
access prefix, the users will dial #7xxx to access an individual
line (where xxx is the line number).
102-02
)%
, n1,
+ROG
,
+ROG
n1 = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670
Expanded)
Enter the Outgoing Line Group number to which the OLG access
code is being assigned.
Table 13-4 Flexible Numbering Plan Default Settings
Flexible Numbering Feature
Feature
Index
Default
Access Code
Programmed
Value
No Data
ABR - Activate
150
ABR - Cancel
151
Call Park Orbits - Activate 170
Call Park Orbits - Park Answer (Retrieve Parked Call) 173
System Orbit Number
174
a
To Next Page
Loading...
