Toshiba Strata CTX28 - Page 365

Telephone Button Programming
200 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-41
Telephone Button
Programming
Table 13-21 Feature/Button Code Parameter Assignments
Feature
Button
Code
Sub-parameters Description Values LCD Prompt
PDN

Parameter 1 Set ring pattern. 1. No Ring
2. Immediate
3. Delay 1
4. Delay 2
Parameter 2 Set ring tone. Enter a value of 1~4. PITCH=
PhDN

Parameter 1 Set PhDN. Maximum 5 digit number. DN=
Parameter 2 Set ring pattern. 1. No Ring
2. Immediate
3. Delay 1
4. Delay 2
Parameter 3 Set ring tone. Enter a value of 1~4. PITCH=
CO

Parameter 1 Set CO number. Enter a value of 0~264. LINE NO=
Parameter 2 Set ring pattern. 1. No Ring
2. Immediate
3. Delay 1
4. Delay 2
Parameter 3 Set ring tone. Enter a value of 1~4. PITCH=
Parameter 4 Owner DN. Max 5 characters OWNER DN=
GCO

Parameter 1 Set GCO number. Enter a value of 0~128. GCO NO=
Parameter 2 GCO Index. Enter a value of 0~128. INDEX=
Parameter 3 Set ring pattern. 1. No Ring
2. Immediate
3. Delay 1
4. Delay 2
Parameter 4 Set ring tone. Enter a value of 1~4. PITCH=
Parameter 5 Owner DN. Max 5 characters OWNER DN=
Pooled Line
Button

Parameter 1 Pooled Line
number.
Enter a value from 0~128. POOL NO=
Parameter 2 Set ring pattern. 1. No Ring
2. Immediate
3. Delay 1
4. Delay 2
Parameter 3 Set ring tone. Enter a value of 1~4. PITCH
Door Lock
Cancel

Parameter 1 Door Lock number. Enter a value from 1~10. NUMBER=
PhDN
Message
Waiting

Parameter 1 Set PhDN number. Max 5 characters. PH DN=
DSS Button

Parameter 1 DSS Button PDN
number. Up to 7
digits with CTX
Release 1.3 or
higher software. Up
to 5 digits for
releases earlier than
1.3.
You cannot set the same
DN in DSS Key for one
station.
PDN=
Start
Application

Parameter 1 Enter Application
number.
Enter a value between
0~99.
APL NO=