Toshiba Strata CTX28 - Page 385

Telephone Button Programming
300 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-61
Telephone Button
Programming
309-02 MOH Source
)% , n, +ROG
n = 1. Quiet Tone
2. External 1 (default)
3. External 2
4. External 3
5. External 4
6. External 5
7. External 6
8. External 7
9. External 8
10. External 9
11. External 10
12. External 11
13. External 12
14. External 13
15. External 14
16. External 15
Set Music On Hold for Analog ISDN DID Trunk
309-03 GCO Key Group
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
GCO Key Group number.
309-04 Pool Key Group
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Pooled Line Key Group
309-
05~07
Audio Day1/Day2/
Night Destination
Type
)% ~ )% , n, 6SNU
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
Select the Destination Type for Audio/Speech calls.
Audio Day1/Day2/
Night Destination
Digits
n1,
+ROG
n1 = Up to 32 digits Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
309-
08~10
Data Day1/Day2/
Night Destination
Type
)% ~ )% , n, 6SNU
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
Select the Destination Type for Audio/Speech calls.
Data Day1/Day2/
Night Destination
Digits
n1,
+ROG
n1 = Up to 32 digits Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
Table 13-28 Programs 303~315 (continued)
Button Sequence Value(s) Summary