Toshiba Strata CTX28 - Page 396

Telephone Button Programming
300 Series Programs
13-72 Strata CTX Programming - Part 3: Telephone Button Programming 6/04
323-04 Service Parameter
)% , n, +ROG
n = Up to 5 digits Enter the Service parameters supplied from PSTN. If no data is
entered in this field, any previously entered data is deleted.
323-05 Network ID
)% , n, +ROG
n = 3~4 digits Enter the Network ID code supplied from PSTN (this field is required if
you selected “Inter LATA Out WATS” Type of Service. If no data is
entered in this field, any previously entered data is deleted.
323-06 ILG
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Specify the ILG for this facility.
323-07 OLG
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Specify the OLG for this facility.
323-08 Min Calls Zone 1
)% , n, +ROG
n = 0~47
(default = 0)
Select the minimum number of Bch in Time Zone 1.
323-09 Max Calls Zone 1
)% , n, +ROG
n = 0~47
(default = 47)
Select the maximum number of Bch in Time Zone 1.
323-10 Min Calls Zone 2
)% , n, +ROG
n = 0~47
(default = 0)
Select the minimum number of Bch in Time Zone 2.
323-11 Max Calls Zone 2
)% , n, +ROG
n = 0~47
(default = 0)
Select the maximum number of Bch in Time Zone 2.
323-12 Min Calls Zone 3
)% , n, +ROG
n = 0~47
(default = 0)
Select the minimum number of Bch in Time Zone 3.
323-13 Max Calls Zone 3
)% , n, +ROG , +ROG
n = 0~47
(default = 0)
Select the maximum number of Bch in Time Zone 3.
324
CBC Time Zones
 , +ROG
This command assigns Call-by-Call Time Zone.
324-00 Channel Group
n,
+ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Channel Group Number
324-01 Start Zone 1
)% , hhmm, +ROG
hh =
mm =
hour (00~23)
minute (00~59)
9999 to delete
Enter the Time Zone Starting Time (hhmm).
324-02 Start Zone 2
)% , hhmm, +ROG
324-03 Start Zone 3
)% , hhmm, +ROG ,
+ROG
Table 13-33 Programs 321~324 (continued)
Button Sequence Value(s) Summary