Toshiba Strata CTX28 - Page 403

Telephone Button Programming
500 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-79
Telephone Button
Programming
509-04 Override QPL
)% , n, +ROG , +ROG
n = 1~16
(default =1)
Select the override QPL value.
510
COS Override
Assignment
 , +ROG
Assigns Class of Service Overrides and their parameters (COS, FRL,
DRL, QPL).
510-00 COS Override Index
n,
+ROG
n = 1~16 Select the COS Override index.
510-01 COS Override Code
)% , n, +ROG
n = Up to 8 digits Select the COS Override Code as entered by users. If no data is
entered in this field, any previously entered data is erased.
510-02 Set COS
)% , n, +ROG
n = 1~32
(default = 1)
Select COS number for this override code.
510-03 Set DRL
)% , n, +ROG
n = 1~16
(default = 1)
Select DRL number for this override code.
510-04 Set FRL
)% , n, +ROG
n = 1~16
(default = 1)
Select FRL number for this override code.
510-05 Set QPL
)% , n, +ROG
n = 1~16
(default = 1)
Select QPL number for this override code.
510-06 Set Network COS
)% , n, +ROG , +ROG
n = 1~32
(default = 1)
Apply this override code to Network COS index
512
SMDR for System
Assignment
 , +ROG
Assigns system-wide SMDR parameters.
512-01 Caller ID Field
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Include Caller ID records in SMDR.
512-02 B Record for
Abandoned Call
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Generate B Record for an abandoned call.
512-03 ANI
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Include ANI in SMDR record.
512-04 Authorization Code
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Include authorization codes in SMDR records.
512-05 End-of-Record CR
)% , n, +ROG , +ROG
n = 1. Enable (default)
2. Disable
Include a Carriage Return (CR) at the end of an SMDR record.
513
SMDR for ILG
Assignment
 , +ROG
This program assigns SMDR parameters for ILGs.
513-00 ILG
n,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
Specify the ILG for which to set SMDR parameters.
513-01 Generate SMDR
Records
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Enable to generate records for this ILG
513-02 DNIS Field Indication
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Check to include DNIS information in records for this ILG.
513-03 B Record for
Incoming Call
)% , n, +ROG
n = 1. Enable
2. Disable (default)
Enable B Record generation for incoming calls with or without
incoming SMDR being enabled.
Table 13-35 Programs 500~577 (continued)
Button Sequence Value(s) Summary